|
Elite Ornamental Aluminum Fence |
Product Information
|
The Manufacturer
Elite Aluminum Fence Products was established in 1986. We are a high quality minded and service oriented company. The staff has over 50 years of fence experience with wood, chainlink and ornamental fences. Elite Aluminum works everyday to make sure that it's product line is the best available. Our customer service depar™ent is available to answer any questions you may have regarding materials or installation.
Application
Elite's line of ornamental fence is an excellent choice for security and protection while being the perfect neighbor friendly fence.
Materials
(A) Aluminum Extrusions: The fence components are of Alloy 6005-T5 with a minimum yield strength of 35,000 PSI.
(B) Screws: The fence is assembled with 18-8 stainless steel corrosion resistant screws. The heads are painted to match the finish of the fence.
(C) Hinges: The hinges are of aluminum extrusions with a 3/8" stainless steel pin.
(D) Accessories: Latches, Finials, Circles, Butterfly Scrolls and Caps are of zinc die cast or cast aluminum.
Finish
The fence materials shall be coated with a TGIC polyester powder-coat finish. The finish meets or exceeds specification 603.8 of the Architectural Aluminum Manufacturers Association.
Colors
Residential Fence is available in six standard colors - White, Black, Walnut Brown, Beige, Quaker Bronze and Hartford Green.
Commercial Fence is available in five standard colors - White, Black, Beige, Quaker Bronze and Hartford Green.
Industrial Fence is available in six standard colors - White, Black, Walnut Brown, Beige, Quaker Bronze and Hartford Green.
Heavy Industrial Fence is available in two standard colors - Black and Quaker Bronze.
Warranty
Elite Aluminum Fence Products offers a Lifetime Warranty on all materials and workmanship as well as the finish of the fence against cracking, peeling, chipping and corroding.
Installation Instructions
1. Establish fence line and install string.
2. Start at end or corner marking and drilling holes
6' 3/4" center to center for residential with 2" post or 6' 1-1/4" center to center for residential with 2-1/2" post, 6' 4-1/2" center to center for commercial with 2" post or 6' 5" center to center for commercial with 2-1/2" post. The industrial grade with 2-1/2" post is 5' 11-1/2" center to center and 6' with 3" post.
3. Install end or corner post in hole. Level post and pour concrete around the post. Leave concrete at least 2 inches below grade.
4. Install horizontal runners of section in prepunched holes. Fasten with screws.
5. Install post on the other end of the section, pour concrete around post.
6. Continue on to the end of the line. Check post for height and alignment after 60 feet.
Specifications
| |
Residential |
Commercial |
Industrial |
Heavy Industrial |
Post |
2" x 2" x .060 Wall* |
2" x 2" x .060 Wall* |
2-1/2" x 2-1/2" x .100 Wall |
2-1/2" x 2-1/2" x .100 Wall |
| 2" x 2" x .080 Watt |
2" x 2" x .080 Watt |
3" x 3" x .125** |
3" x 3" x .125 Walt** |
| 2" x 2" x .125 Wall |
2" x 2" x .125 Wall |
4" x 4" x .125/.250 Watt |
4" x 4" x .125/.250 Watt |
| 2-1/2" x 2-1/2" x .100 Wall |
2-1/2" x 2-1/2" x .100 Wall |
6" x 6" x .125 Watt |
6" x 6" x .125 Watt |
Horizontal Rails |
1-1/8" x 1" |
1-1/8" x 1-3/4" |
1-5/8" x 1-5/8" |
1-5/8" x 1-5/8" |
Enclosed Bottom |
N/A |
N/A |
N/A |
YES |
Side Walls |
.082 |
.082 |
.100 |
.100 |
Top Walls |
.062 |
.062 |
.070 |
.070 |
Pickets |
5/8" x 5/8" x .050 Wall |
3/4" x 3/4" x .050 Walt |
1" x 1" x .062 Wall |
1" x 1" x .062 Wall |
Picket Spacing |
3-13/16" or 1-5/8" |
3-3 1/32" |
4" or 1-1/2" |
4" or 1-1/2" |
Heights |
3, 4, 5, & 6 Feet |
3, 4, 5, & 6 Feet |
3, 4, 5, 6, 7, & 8 Feet |
3, 4, 5, 6, 7, 8 & 10 Feet |
Colors |
All Colors |
All Colors except Walnut Brown |
Alt Colors |
Black, Quaker Bronze |
Screws: 18-8 Stainless Steel corrosion resistant. The heads are painted to match the color of the fence. Panels: Fully assembled 6 feet in length plus or minus one inch. Colors Available: Black, Quaker Bronze, White, Walnut Brown, Beige & Hartford Green.
*Not available in Walnut Brown, Beige or Hartford Green
**Not available in Walnut Brown
|
The residential fence is constructed of 1-1/8" x 1" rails, 5/8" pickets and 2" x 2" or 2-1/2" x 2-1/2" post. Our horizontal rails are engineered for maximum strength.
|
Lifegard
2-Rail, 4 ft. high fence is ideal for swimming pools and meets 1996 BOCA pool code. Constructed of 1-1/8" x 1-3/4" rails, 3/4" square pickets and 2" x 2" or 2-1/2" x 2-1/2" post.
Commercial
The commercial fence is constructed of 1-1/8" x 1-3/4" rails, 3/4" square pickets and 2" x 2" or 2-1/2" x 2-1/2" post.
Residential |
Commercial |
|
 Industrial
The industrial fence is constructed of 1-5/8" x 1-5/8" rails, 1" x 1" pickets, 2-1/2" x 2-1/2", 3" x 3" or 4" x 4" post.
Heavy Industrial
The heavy industrial fence is constructed of 1-5/8" x 1-5/8" rails with enclosed bottom and no exposed screws, 1" x 1" pickets, 3" x 3" post or 4" x 4" post. |
|
|
Standard gates are available to match each style and grade of fence. All gate leafs will have a diagonal brace. Gate leafs over 6 ft. shall be V-braced. Standard hinges and latch are furnished with each gate. We also offer a full line of custom gates including estate gates and curve top gates.
|
All Gates include standard hinges and latch
Walk Gates: (Standard) 3 13/16” picket spacing or (Optional) 1 5/8” picket spacing
Available in 3’, 3 ½’, 4’, 5’, & 6’ wide
Style:
EFS-10
EFS-15
EFF-20
EFF-25
EFS-50
EFS-55
Drive Gates: (Standard) 3 13/16” picket spacing or (Optional) 1 5/8” picket spacing
Available in 6’, 7’, 8’, 10’, & 12’ wide
Styles:
EFS-10
EFS-15
EFF-20
EFF-25
EFS-50
EFS-55
|
All Gates include standard hinges and latch
Walk Gates: (Standard) 3 31/32” picket spacing or (Optional) 1 5/8” picket spacing
Available in 3’, 3 ½’, 4’, 5’, & 6’ wide
Style:
EFS-10
EFS-15
EFF-20
EFF-25
EFS-50
EFS-55
Drive Gates: (Standard) 3 31/32” picket spacing or (Optional) 1 5/8” picket spacing
Available in 6’, 7’, 8’, 10’, & 12’ wide
Style:
EFS-10
EFS-15
EFF-20
EFF-25
EFS-50
EFS-55
|
All Gates include standard hinges and latch
Walk Gates: (Standard) 4” picket spacing or (Optional) 1 ½” picket spacing
Available in 3’, 3 ½’, 4’, 5’, & 6’ wide
Style:
EFS-10
EFS-15
EFF-20
EFF-25
EFS-50
EFS-55
Drive Gates: (Standard) 4” picket spacing or (Optional) 1 ½” picket spacing
Available in 6’, 7’, 8’, 10’, & 12’ wide
Style:
EFS-10
EFS-15
EFF-20
EFF-25
EFS-50
EFS-55 |
NO EXPOSED SCREWS & ENCLOSED BOTTOM
All Gates include standard hinges and latch
Walk Gates: (Standard) 4” picket spacing or (Optional) 1 ½” picket spacing
Available in 3’, 3 ½’, 4’, 5’, & 6’ wide
Style:
EFS-10
EFS-15
EFF-20
EFF-25
EFS-50
EFS-55
Drive Gates: (Standard) 4” picket spacing or (Optional) 1 ½” picket spacing
Available in 6’, 7’, 8’, 10’, & 12’ wide
Style:
EFS-10
EFS-15
EFF-20
EFF-25
EFS-50
EFS-55 |
 ZipTrack™ Aluminum Cantilever Gates are manufactured exclusively by Elite Fence Products Inc. Our exclusive ZipTrack™ Cantilever Gates are offered in a variety of styles and colors to match and complement your Ornamental Aluminum Fence. We also offer ZipTrack™ Aluminum Cantilever Gates in frame only, which will allow you to add your own wood, chain link or other filler material for maximum security. ZipTrack™ Aluminum Cantilever Gates and truck assemblies are covered under a Five Year Limited Warranty.
Materials
ZipTrack™ Aluminum Cantilever Gates are constructed of our exclusive upper and lower track, fabricated from extrusions of 6061 -T6 aluminum alloy. The upper track weighs 5.816 #/L.F. and the lower track weighs 3.22 #/L.F. The upper and lower tracks shall be welded and/or bolted to 2"x2"x.125 wall sq. aluminum tube, which weighs 1.12#/L.F. Each front section shall have one (1) diagonal brace of 1 "x2"x.125 wall aluminum tube, which weighs .822 #/ L.F. Each tail section of the gate shall be X¬braced with two (2) 1 "x2"x.125 wall aluminum tube, which weighs .822 #/ L.F. ZipTrack™ Aluminum Cantilever Gates can be ordered in any of our six standard colors, which utilizes the same TGIC polyester powder-coat finish. This finish meets or exceeds specifications 603.8 of the Architectural Aluminum Manufactures Association. ZipTrack™ Aluminum Cantilever Gates are also available in aluminum mill finish.
Filler Material
ZipTrack™ Aluminum Cantilever Gates are manufactured in our plant to accept many different types of filler material. Ornamental picket type gates have holes punched in the upper track to accept 1 "x1 "x.062 wall pickets and 2"x2"x.125 wall posts; the pickets shall be attached to the track with stainless-steel screws. ZipTrack™ Aluminum Cantilever Gates made for chain link filler wire can be shipped with the wire in place or wire can be easily installed on the job site. The fabric shall be held in place by tension bands, tension bars and bolts. Gates with barbwire shall use brace bands and bolts to hold the wire in place. ZipTrack™ Aluminum Cantilever Gates will also accept wood and PVC filler (Note: gaps should be left between solid fillers to allow wind to pass thru.).
Modular/Knock-Down Gates
ZipTrack™ Aluminum Cantilever Gates can be ordered as modular/knock-down gates, ideal for transporting tall gates. These gates come ready to assemble with all holes pre¬drilled for 3/8" stainless-steel grade 8 bolts, which are supplied for assembly. These modular sections shall slide into the upper and lower tracks and bolt into place.
Each modular section shall be constructed of 1 "x2"x.125 aluminum tube and/or 2"x2"x.125 sq. aluminum tube. Each front section shall have one (1) diagonal brace of 1"x2"x.125 wall aluminum tube, which weighs .822 #/ L.F. Each tail section of the gate shall be X-braced with two (2) 1 "x2"x.125 wall aluminum tube, which weighs .822 #/ L.F.
Fabric can easily be installed on the jobsite once the gate is assembled. Ornamental picket type gates CANNOT be ordered as modular/knock-down gates.
Hardware
All ZipTrack™ Aluminum Cantilever Gates include all the necessary hardware for a complete and professional installation. Hardware is available for 3", 4" and 6" round or square post and comes painted to match the color of the gate.
ZipTrack™ Aluminum Cantilever Gates feature our own special truck assemblies. These assemblies are made from galvanized steel and have many unique features. Each assembly features a'/." stud which is above industry standards. Each of the assemblies has two (2) axels press fitted to the main body. The axels are furnished with four (4) permanently lubricated sealed ball bearing wheels, which are mounted vertically for the gate to roll on. The end of each assembly has one (1) horizontally mounted permanently lubricated sealed ball bearing wheel used for alignment. Our assemblies also use a pivotal center point to help easy with installation and improve the movement of the gate.
Each gate utilizes two (2) swivel type truck assemblies as upper guides. Each truck assembly is mounted to a post with the supplied bracket, and each bracket for an upper guide uses two (2) 5/8" U-bolts. Each gate also utilizes two (2) lower guides which are permanently mounted to the bracket which attaches to the post with one (1) 5/8" U-bolt. Each lower guide uses a ZipTrack™ Aluminum Cantilever Gates are, which should be centered vertically in the lower track to limit lateral movement. This enclosed lower guide assembly offers greater safety utilizing guarded pinch points. All brackets and gate latches shall be galvanized after fabrication.
|
Return to Main
|
